අන්තර්ගතයට යන්න
mcqdinethlive

Unit 4, Digital Circuits

4.4 Sequential Circuits

This lesson explores the design and functionality of combinational and sequential logic circuits used in the CPU and physical memory. It details the operation of Half Adders and Full Adders for binary addition, and introduces how Flip-Flops and Feedback Loops are utilized for 1-bit memory storage in computer systems.

ප්‍රධාන සංකල්ප

Half Adder
A basic digital combinational circuit that adds two single-bit binary numbers, producing a SUM output (via an XOR gate) and a CARRY output (via an AND gate).
Full Adder
A combinational circuit that adds three binary digits (two input bits and a Carry-In bit from a previous addition), producing a SUM output (A ⊕ B ⊕ C) and a Carry-Out output (A.B + B.C + A.C).
Combinational Circuits
Logic circuits where the output at any given time depends solely on the inputs present at that exact moment.
Sequential Circuits
Logic circuits where the output depends not only on the current inputs, but also on past inputs and outputs, relying on feedback loops to maintain state.
Feedback Loop
A pathway in sequential circuits where an output is fed back into the input, enabling the circuit to remember its state.
Flip-Flop
A fundamental 1-bit electronic storage device built using logic gates (such as NAND or NOR) that forms the basic building block of physical memory like SRAM.
Latch Flip-flop (R-S Latch)
The simplest type of flip-flop with two inputs (Set and Reset) and two complementary outputs (Q and Q-bar), constructed using cross-coupled NAND or NOR gates to maintain its state until triggered to change.

MCQ කට්ටල

MCQ 12

විභාගයේදී

  • Drawing and completing truth tables for Half Adders and Full Adders
  • Writing Boolean expressions for SUM and CARRY outputs
  • Identifying and drawing logic gate diagrams of Half Adders, Full Adders, and RS Latches (using NAND or NOR gates)
  • Distinguishing between combinational and sequential logic circuits with examples