Unit 2, Introduction to Computer
2.4 Memory Systems
This lesson explores the hierarchical nature of computer memory systems, categorizing them into volatile and non-volatile structures. It discusses memory characteristics such as speed, capacity, and cost, alongside classifications of RAM, ROM, and secondary storage devices. Additionally, it highlights sequential and random memory access methodologies.
ප්රධාන සංකල්ප
- Memory Hierarchy
- A structured organization of computer memory ranging from fast, costly, low-capacity registers at the top to slower, cheaper, high-capacity secondary storage at the bottom.
- Volatile Memory
- Temporary storage that retains its contents only while power is supplied to the system, such as registers, cache, and RAM.
- Non-volatile Memory
- Permanent storage that retains stored data even when the power supply is disconnected, such as ROM and secondary storage.
- Cache Memory
- High-speed memory used to store frequently used instructions and data during execution to reduce processor wait times.
- SRAM (Static RAM)
- A fast type of random access memory that holds data as long as power is supplied without needing to be constantly refreshed, commonly used for cache and registers.
- DRAM (Dynamic RAM)
- A type of random access memory that stores each bit of data in a separate capacitor within an integrated circuit, requiring periodic refreshing to retain data.
- SDRAM (Synchronous DRAM)
- A type of dynamic RAM that synchronizes its speed with the computer's system clock.
- PROM (Programmable ROM)
- A type of read-only memory chip onto which data can be written only once, after which the data becomes permanent.
- EPROM (Erasable PROM)
- A programmable read-only memory chip whose contents can be erased using ultraviolet light and then rewritten.
- EEPROM (Electrically Erasable PROM)
- A programmable read-only memory chip whose contents can be erased and rewritten electrically.
- Sequential Access
- An access method where data stored in a storage device must be accessed in a linear, step-by-step order, one block after another.
- Random Access
- An access method that allows direct access to any data location on a storage device in any order, without needing to traverse preceding locations.
MCQ කට්ටල
MCQ 12විභාගයේදී
- Drawing and labeling the memory hierarchy pyramid
- Distinguishing between SRAM, DRAM, and SDRAM
- Explaining the differences between PROM, EPROM, and EEPROM
- Classifying memory devices into volatile/non-volatile and primary/secondary storage
- Comparing memory access methods with examples
